Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Battery Tester 043285
3. Pull off the cover as shown in the illustration.
4. Remove the discharged battery.
5. Insert a 9 volt battery (alkaline recommended) as shown. Make sure
the positive and negative terminals are in the correct position.
6.
Push the cover back in and tighten the screw.
Technical Data
Model:
•
Battery Tester 043285
Display:
•
LCD graphic display
Temperature compensation:
•
queried by the test instrument
Operating temperature:
•
-18 ˚C to 50 ˚C
Test area:
•
100-900 CCA, 100-900 SAE,
100-550 DIN, 100-900 EN,
100-550 IEC
Integrated printer:
•
Power supply through the tested
battery
Voltage range:
•
12-volt batteries with residual
voltage down to 1 volt
Slide the cover in this direction
Cable length:
•
533.4 mm
Power supply:
•
Supply via tested batte- rie or
integrated
9 volt battery
Voltmeter:
•
0 to 30 VDC +/-0.05 VDC
Languages: 19
Housing material:
•
Acid-resistant
ABS plastic
Dimensions:
•
230 mm x 102 mm x 65 mm
Weight:
•
499 g
20
-
-
Werbung
