Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9a)
Clack
9b)
2x
9c)
2x
Clack Clack
-
10)
Clack
Clack
Clack Clack
-
Action
9) Intermediate position II
Note
This function allows you to move the curtain/canopy from the lower end
limit to intermediate position II. Intermediate position II can only be set if
both end limits have already been set.
9a) Setting intermediate position II
Move the curtain/canopy to the desired in-
termediate position II.
First press the STOP button and, within 3
seconds, also press the RETRACT button and
keep both buttons pressed.
9b) Adjustment to intermediate position II
Press the RETRACT button twice within one
second.
9c) Deleting intermediate position II
Note
The curtain/canopy moves to intermediate position II from the lower end
limit.
Move the curtain/canopy to the desired in-
termediate position II.
First press the STOP button and, within 3
seconds, also press the RETRACT button and
keep both buttons pressed.
10) Programming additional transmitters
Note
In addition to the master transmitter, up to 15 additional transmitters can
be programmed in the tubular drive.
The end limits must be set prior to programming the radio sun- and wind
sensor SC611
Press the programming button of the mas-
ter transmitter programmed according to
point (3) for 3 seconds.
Now press the programming button of a
new transmitter which is not yet pro-
grammed in the tubular drive for 3 seconds.
In doing so, the programming mode for the
tubular drive is activated for a new trans-
mitter for 3 minutes.
Now press the programming button of the
new transmitter to be programmed once
again for 3 seconds.
24
Operating Instructions
Response
The tubular drive makes a „clack" sound to
confirm.
Intermediate position II has been stored.
The curtain/canopy moves to intermediate
position II.
The tubular drive makes a „clack" sound to
confirm.
Intermediate position II has been deleted.
The tubular drive makes a „clack" sound to
confirm.
The tubular drive makes a „clack" sound to
confirm.
The tubular drive makes a „clack" sound to
confirm.
The new transmitter has now been pro-
grammed in the drive.
Werbung
