Becker R8/17PSF Bedienungsanleitung Seite 23

Operating Instructions
7b)
Clack Clack -
8a)
Clack
8b)
2x
8c)
2x
Clack Clack -
Action
7b) Deleting both end limits
Move the curtain/canopy to any position
between the two end limits.
First press the programming button and,
within 3 seconds, also press the STOP but-
ton and keep both buttons pressed for 10
seconds.
8) Intermediate position I
Note
Intermediate position I is an intermediate position for the curtain/canopy
and can be set at any given position between the upper and lower end
limits. Intermediate position I can only be set if both end limits have already
been set.
8a) Setting intermediate position I
Move the curtain/canopy to the desired in-
termediate position I.
First press the STOP button and, within 3
seconds, also press the EXTEND button and
keep both buttons pressed.
8b) Adjustment to intermediate position I
Note
The curtain/canopy moves to the intermediate position I from the upper end
limit.
Press the EXTEND button twice within one
second.
8c) Deleting intermediate position I
Move the curtain/canopy to the desired in-
termediate position I.
First press the STOP button and, within 3
seconds, also press the EXTEND button and
keep both buttons pressed.
23
Response
The tubular drive makes a „clack-clack"
sound to confirm.
The end limits have been deleted.
The tubular drive makes a „clack" sound to
confirm.
Intermediate position I has been stored.
The curtain/canopy moves to intermediate
position I.
The tubular drive makes a „clack-clack"
sound to confirm.
Intermediate position I has been deleted.