Hitachi VM-H38E Wartungsanleitung Seite 35

4-3. Major Components in Main Chassis Removal
Caution: Attach the cassette holder <CSH> before
removing the MCBl, MCB2, MCB3 and MCB4.
=°°S Components to remove in advance: ~ Atemec:
¢ Cassette Holder <CSH>
(1) Main chassis bracket 1 <MCB1>
1) Remove two (2) screws.
(2) Main chassis bracket 2 <MCB2>
1) Remove one (1) screw.
(3) Main chassis bracket 3 <MCB3> and
dew sensor <DEW>
1) Remove two (2) screws.
2) Remove one (1) screw.
(4) Wain chassis bracket 4 <MCB4>
1) Remove two (2) screws.
Caution: Reinstall the MCB1, MCB2, MCB3 and MCB 4
after installing the cassette holder.
4-3-2. Cylinder assembly <CYL> and
guide plate <GP> (Fig. 4-9)
(1) Cylinder assembly <CYL>
1) Remove three (3) screws.
Caution 1: Do not touch video head tips with
your fingers or tools, etc. during
work.
Caution 2: After reinstalling the CYL, be sure
to perform the following adjustment.
5. ADJUSTMENTS AFTER REPLACING THE CYLINDER
in CHAPTER 3
(2) Guide plate <GP>
1) Remove two (2) screws.
E2-23