Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3-3.
Lens Block Removal
Caution:
Since the lens block of this camera/
recorder
is made with high precision,
never remove components
other than those
specified.
3-3-1.
Focus motor <FN>,
zoom motor <ZM,
iris block <IRIS>,
position sensor <PS>
and tens flat cable <LF>
(Fig. 3-7)
"=cComponents
to remove
in advance:
ea
¢ Opening right case
3
¢ Operation switch unit <OSW>,
3
front case <FC>,
IR/LED circuit board
<LR/LED CBA>, main circuit board
<MAN CBA>, camera block<CAM>
e Auto focus circuit board <AF CBA>,
3-1-4
process
<PC CBA>,
sensor <SP CBA>,
camera frame <CF>,
lens block <LENS>
Caution:
Be careful
not to damage the LF.
(1) Focus motor <FN>
1)
Unsolder four (4) points.
2)
Remove one
(1) screw.
4. POSITION
SENSOR (PS)
Fig.
3-7
(2) Zoom motor <ZN>
1)
Unsolder
two (2) points.
2)
Remove one
(1) screw.
(3) Iris block <IRIS>
1)
Disconnect
one
(1) flat cable.
2)
Remove one
(1) screw.
3)
Remove the IRIS in the direction of the arrow.
Caution:
Be careful not to damage the iris blades.
Also take care that foreign matter such
as dust,
etc.
does not
adhere
to the
iris blades.
(4) Position sensor <PS>
1)
Unsolder three
(3) points.
2)
Remove one
(1) screw.
(5) Lens flat cable <LF>
1)
Unsolder four (4) points on the FM.
2)
Unsolder
two (2) points on the 2M.
3)
Disconnect
one
(1) flat cable on the IRIS.
4)
Umsolder
three
(3) points on the PS.
5)
Remove three
(3) screws.
E2-17
Werbung
