Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3-1-4.
Autofocus
circuit
board <AF CBAD,
(2) Sensor circuit board <SP CBA>
front case <FC>,
IR/LED circuit board
4)
Remove two (2) screws.
<LR/LED CBA>, main circuit board
Caution:
When the sensor cover
is removed,
the
<MAN CBA>,
camera block <CAM>
crystal
filter and sensor rubber are
removed on their own.
Be careful
not
(1) Autofocus circuit
board <AF CBA> and process
to damage the crystal
filter.
circuit
board <PC CBA>
5)
Remove two (2) screws.
,
pean
areas cable.
(3) Camera frame <CF> and lens block <LENS>
3).
Remove the AF CBA in the direction of the
Caution
1: Remove the AF CBA and PC CBA in
arrow.
(The AF CBA and PC CBA are connected
advance before removing the CF.
via an in-board connector. )
Caution 2: Remove the AF CBA, PC CBA and SP CBA
4)
Remove the PC CBA in the direction of the
in advance before removing the LENS.
arrow.
(The SP CBA and PC CBA are connected
1)
Remove three (3) screws.
via an in-board connector. )
2)
Widen the section of the CF that
is engaged
with the LENS slightly and remove
the LENS
from the CF.
CRYSTAL FILTER
SENSOR COVER
2. SENSOR CIRCUIT BOARD (SP CBA)
Fig. 3-4
E2-14
Werbung
