Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DISASSEMBLY
CAUTION
. When dismantling
the
lens block,
never
remove
components
other
than
the zoom
motor,
iris block,
focus motor and flat
cable
of the
lens.
2. Set the camera/recorder to the eject state
before dismantling
it.
If the camera/
recorder will not enter the eject state
due to a defect,
refer to "2. DISASSEMBLY
METHOD WHEN TROUBLE OCCURS".
3. Disconnect
flat cables from connectors by
the procedure shown in Fig. A.
Since many circuit boards
in the camera/
recorder are connected by in-board
connectors,
be sure to follow DISASSEMBLY
when removing the circuit boards.
4. The shape of the EVF and part of the
dismantling procedure
are different
between the CRT EVF and LCD EVF models.
5. The items and parts marked @ before
those
are exclusively
for CPT EVF model.
The items and parts marked % before
those
are exclusively for LCD EVF model.
1. IDENTIFICATIONS OF MAJOR COMPONENTS
Numbers in ( ) show the numbers of items that
describe how to remove
the components.
1-1.
Wajor Components and Circuit
Boards
CASSETTE LID
WAIN BLOCK
Fig.
1-1-1
Me
@ Release the lock of the connector
on the left and right simultaneously.
@) Pull out the flat cable.
ELECTRONIC VIEWFINDER (EVF)
CRT EVF MODEL
CHAPTER 2 "id
E2-1
Werbung
