Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4-2-5.
Mechanism state switch <MSW,
loading gears 1 <LG1>,
2 <LG2> and 3 <LG3>,
cam gear <CG>,
cam arm <CA>,
take-up slider <TUS> and pressure
roller
cam gear <PCG>
(Fig. 4-7)
Caution
1: Remove the LM only when removing the
LG1, LG2 and LG3.
Caution 2: Remove the UPC only when removing the
CG, CA and TUS.
Caution 3: Remove components
in items 4-2-3 and
4-2-4 only when removing the TUS.
Caution 4: eve the TUC only when removing the
"Components
to remove
in advance:
Subchassis plate <SCP>,
take-up ree
disk <TRD>,
idler gear <IG>,
subchassis
holder <SCH>,
subchassis
assembly
<SCA>
(2) Loading gears 1, 2, 3 <LG1>,
<LG2>,
<LG3>
1)
Remove one
(1) screw.
2)
Remove the loading gear plate in the
direction of the arrow.
Caution:
After reinstalling
the LG1, LG2 and LG3,
be sure to perform the following
adjustment.
3. PHASE MATCHING
IN ASSEMBLY
in CHAPTER 3
(3) Cam gear <CG>,
cam arm <CA> and
take-up slider <TUS>
1)
Remove one
(1) screw.
2)
Remove the CG in the direction of the arrow.
. pou ne eee <LMD, supply guide
4-2-1
3)
Remove the TUS in the direction of the arrow.
¢ Upper chassis <UPC>
4-2-2
Caution:
After reinstalling
the CG, CA and TUS,
¢ Tension arm <T-ARM>,
tension band
4-2-3
be sure to perform the following
<TBA>,
supply main brake <SMB>,
supply
subbrake <SSB>,
supply reel disk <SRD>,
Supply guide roller base <SGB> and
4-2-4
supply guide roller rail <SRR>
(1) Mechanism state switch <MSW>
1)
Remove one (1) screw.
Caution:
After reinstalling
the MSW, be sure to
perform the following adjustment.
3. PHASE MATCHING
IN ASSEMBLY
in CHAPTER 3
3. CAM GEAR (CG)
adjustment.
3. PHASE MATCHING
IN ASSEMBLY
in CHAPTER 3
(4) Pressure
roller cam gear <PCG>
1)
Remove one
(1) screw.
2)
Move the eject arm in the direction of the
arrow
to remove
the PCG.
Caution:
After reinstalling
the PCG, be sure to
perform the following adjustment.
3. PHASE MATCHING
IN ASSEMBLY
in CHAPTER 3
2. LOADING GEAR 1 (LG1)
2. LOADING GEAR 3 (163)
E2-22
EJECT ARM
Fig. 4-7
Werbung
