Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2-2-2.
EVF lens <EL>,
EVF
left case <EVF-L>,
EVF right case <EVF-R>,
LCD drive
circuit
board <LCD-D CBA>,
backlight
holder
<BLH>,
backlight
<BKL>,
LCD
(color liquid crystal display),
LCD
holder <LCD-H>
(Fig. 3-6)
Components
to remove
in advance
pening right case <RC>, EVF-D CB
EVF
(1) EVF lens <EL>
1)
Turn the EL in the direction of arrow to
remove
it.
(2) EVF left case <EVF-L>
1)
Remove two (2) screws.
Fig. 3-6
E2-16
(3) EVF right case <EVF-R>,
LCD drive circuit
board <LCD-D CBA>,
backlight
holder <BLH),
backlight <BKL>,
LCD (color
liquid crystal
display),
LCD holder <LCD-H>
Caution
1: Remove the EL in advance.
Caution 2: When handling the LCD, never
touch the
LCD panel surface and flat cable
connection section.
Otherwise,
it
could cause a defect.
1)
Pull out the LCD-D CBA, BLH, BKL, LCD and
LCD-H in the direction of the arrow.
2)
Disconnect
one
(1) connector
and one
(1) flat
cable.
3)
Release one (1) tab.
4)
Remove the BLH in the direction of the arrow.
5)
Remove the BKL and LCD from the LCD-H.
3. EVF RIGHT CASE
(EVF-R)
1. EVF LENS(EL)
LCD EVF MODEL
Werbung
