Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4-2-3.
Tension arm <T-ARM>,
tension
band <TBA>,
supply main brake <SMB>,
supply subbrake
<SSB>,
tension spring hook <TSH>,
supply
reel disk <SRD> and take-up brake
<TB>
(Fig.
4-5)
"<Components to remove
in advanc
e Sub chassis plate <SCP>,
take-up reel disk <TRD>
(1) Tension arm <T-ARM>,
tension band <TBAD,
supply main brake <SMB> and tension
spring
hook <TSH>
1)
Remove the tension spring.
2)
Remove the spring.
3)
Remove one
(1) washer and one
(1) screw.
4)
Release
two (2) tabs.
5)
Remove one
(1) screw.
1. TENSION SPRING HOOK (TSH)
1, SUPPLY MAIN BRAKE (SMB)
2. SUPPLY REEL DISK (SRD)
t
Fig. 4-5
E2-20
Caution:
After reinstalling
the T-ARM and TBA, be
(2
1)
2)
(3
)
—
sure to perform the following adjustment.
4-1,
Tension Pole Position/Tension Torque
Adjustment
in CHAPTER 3
Supply subbrake <SSB> and supply ree! disk
<SRD>
Remove one
(1) screw.
Remove the SSB and SRD in the direction of
the arrow.
Take-up brake <TB>
Remove one
(1) washer.
TENSION SPRING
1. TENSION ARM (T-ARM)
1. TENSION BAND (TBA)
Werbung
