Hyundai 57259 Bedienungsanleitung Seite 21

Fault
The engine does not run smoothly at
idling speed.
The engine does not accelerate.
Strong vibrations
No chain oil is coming out
Inadequate cutting performance.
TECHNICAL DATA
Displacement
Bore
Stroke
Power output
Idling speed
Max. speed
Bar length
Chain brake time
Oil container capacity
Fuel tank capacity
Fuel
Oil
Mixing ratio
Weight
Noise and vibrations
L (sound pressure)*
pA
L (acoustic power)**
WA
Vibration emission value a ***
h
Uncertainty
* Uncertainty K =
** Uncertainty K =
*** Uncertainty K =
NOISE
The sound levels stated are emission levels; they are not necessarily
safe working levels. Even though the measured values are related
to exposure levels, this information does not allow to determine if
additional measures are required.
Factors that can affect the radiated levels are duration of exposure,
the characteristics of the work area and other sound sources, as well
as the number of machines of the same type or other machines in
the work area.
The acceptable exposure levels may differ according to the country
of use.
This information is only intended to help the user assess possible
risks.
Cause
The air filter blocked.
Old or incorrectly mixed fuel.
The carburettor is set incorrectly.
The petrol filter is dirty.
Old or incorrectly mixed fuel.
The carburettor is set incorrectly.
Damaged cutting tools or drive parts.
The tank is empty.
The chain oil does not correspond with the
specification.
The oil supply is blocked.
The saw chain is blunt.
The saw chain is worn.
cc 58
mm 42.2
mm 34
kW 1.9
min -1 3,200
min -1 10,000
cm 50
s <0.12
ml 260
ml 550
unleaded Euro 95 (E10)
2-takt
1:25
kg 5.5
dB(A) 98.8
dB(A) 110.0
m/s 2 7.235
dB(A) 3.0
dB(A) 3.0
2
m/s 1.5
Measure
Clean or replace the air filter.
Empty the tank/fill it with fresh fuel mixture.
Have the carburettor adjusted by a service
centre.
Have the petrol filter replaced by a service
centre.
Empty the tank/fill it with fresh fuel mixture.
Have the carburettor adjusted by a service
centre.
Switch off the machine immediately. Have
defective parts replaced by a service centre.
Top up the chain oil.
Replace the chain oil.
Clean the oil supply.
Have the saw chain reground by a specialist.
Replace the saw chain.
Wear hearing protection!!
GUARANTEE
Refer to the enclosed guarantee conditions for the terms
and conditions of guarantee.
ENVIRONMENT
Your product, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries
Do not dispose of machines into domestic waste. According to
the European Guideline 2002/96/EC for Waste Electrical and
Electronic Equipment and its implementation into national right,
machines that are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
Subject to change; specifications can be changed without further
notice.
ENGLISH
23