General Notes - WimTec PROOF P6 Montage- Und Bedienungsanleitung

EN
PROOF P6

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
20 Shower control
Congratulations on purchasing the WimTec PROOF P6.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec PROOF P6 - 6 V
WimTec PROOF P6 - 12 V
Delivery scope:
On wall aluminium housing with integrated electronics, thermostat
with hot-water barrier, vandalproof shower head, 1 magnetic valve,
connection module for external supply or battery module incl.
battery and mounting parts.
Important installation notes:
Mounting and installation may only be performed by a qualified
!
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards
and provisions must be observed! Provide for 230 V / 12 V power
unit outside of the protected zone.
WimTec PROOF P6
Art.Nr. 121 148
Art.Nr. 121 155