General Notes - WimTec SanTec OCEAN U8 Montage- Und Bedienungsanleitung

EN

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
10 Urinal control
OCEAN U8
Congratulations on purchasing your urinal control
SanTec OCEAN.
In order to ensure that you will be able to enjoy this high-qua-
lity product for many years, please take note of the following
cleaning and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, nano sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
Lime deposits on the glass front panel combined with wetness
can impair the touch-tronic function. To ensure proper operati-
on,
we recommend regular cleaning of the glass panel using a
power cleaner.
This manual is valid for the following products:
SanTec OCEAN U8 230 V
Glass white
Glass black
Delivery scope:
Safety glass-front plate with frame, mounting frame with integ-
rated electronics, power supply, magnetic valve and
fixing material.
Important installation notes:
Mounting and installation may only be performed by a quali-
fied service provider in accordance with DIN 1988, ÖVE/ÖNORM
E8001 and VDE 0100 Part 701. When planning and installing
!
sanitary facilities, all relevant local, national and inter-national
standards and provisions must be observed!
Make the feeder by a 2-pin main switch with minimum 3 mm
connection opening and protect with maximum 6 A!
SanTec OCEAN U8
Art.No 109 856
Art.No. 115 584