General Notes - WimTec ONE WT Montage- Und Bedienungsanleitung

EN
ONE WT

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
12 Washbasin fitting
Congratulations on purchasing the WimTec ONE WT.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec ONE WT wall fitting:
Art.No. 102 680
Delivery scope:
ONE WT sensor mit cover cap, electronics module, magentic valve
and stainless steel cover cap for valve unit.
Important installation notes:
Mounting and installation may only be performed by a qualified
!
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and international standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone.
WimTec ONE WT