Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLAYBACK
e
Is the power cord properly plugged into the outlet?
e
ls the TIMER switch set to the OFF position?
e
Is the amplifier properly set for tape playback?
®
Are all connecting cords properly connected?
©) Load the cassette tape
to be played back.
AUTO
REVERSE
RE VERSE
(1) Press the POWER switch to ON.
AUTO-STOP MECHANISM
When the tape comes to the end and is fully wound up in the
playback, recording, fast forward or rewind modes or when
the tape is fully rewound, the mode is automatically released
and the tape is stopped by the auto-stop mechanism.
This
©) Load the pre-recorded
cassette
tape
mechanism prevents the tape from becoming elongated and
into the cassette
holder with the ex-
the pinch rollers from being deformed.
posed tape surface facing down.
MUSIC SEARCH AND SKIPPING
@ Select the DOLBY
NR switch posi-
SEARCH FUNCTIONS
tion.
NOTE:
6) Select
the
tape
travel
mode
using
The music search and skip functions may not work pro-
@
Press the EJECT button to open the
cassette door.
J
perly with the following types of tapes.
This does not,
the MODE
switch.
however, mean that there is something wrong with the
== ( BL): For playing back one side of the tape.
unit.
where
pianissimo
sections
continue
for
many
seconds, and tapes where, in a program, the sound is
broken for several seconds.
e
Tapes whose programs have all been recorded at a
low level.
e
Tapes of conversation
where
the recording of the
voice is intermittent.
Tapes where a high level of noise or hum has been
recorded between programs.
The tape is played back in the forward direction when
the " > " switch is pressed and in the reverse direction
when the ' < " switch is pressed.
@ Adjust the volume to the preferred
level with the volume control on the
stereo amplifier.
A
Press the STOP (m) switch to stop
È
the playback.
To temporarily stop the playback,
press the PAUSE
( EE ) switch. To resume playback, press the PAUSE
(BB ) switch again.
Werbung
