Pioneer CT-X500 Bedienungsanleitung Seite 14

SPECIFICATIONS
SYSLEM rannte 4 track, 2 channel stereo
Heads! een
"Hard Permalloy'' recording/playback head x 1
"Ferrite" erasing head x 1
Motor au DC servo capstan motor x 1
DC reel motor x 1
Wow/Rlütten ac ae: No more than 0.06% (WRMS)
No more than + 0.16% (DIN)
Fast Winding Time ......................... Approx. 100 seconds
(C-60 tape)
Frequency Response
—20 dB recording:
Normal tapa sarene nears 25 to 17,000 Hz
(35 to 16,000 Hz + 3 dB)
Chrometape nungen 25 to 17,000 Hz
(35 to 16,000 Hz + 3 dB)
Métal Habe uni. 25 to 18,000 Hz
(35 to 17,000 Hz + 3 dB)
0 dB recording:
CHOME TAPE sscicsiceicissessscnssewanensapapenss 25 to 9,000 Hz
Metalitape:. rennen 25 to 14,000 Hz
Normal tape: na 25 to 8,000 Hz
Signal-to-Noise Ratio
DolbyviNR'OFF aan More than 57 dB
Noise Reduction Effect
Dolby NR B type ON ............ More than 10 dB (at 5 kHz)
Dolby NR C type ON ............ More than 19 dB (at 5 kHz)
Harmonic Distortion ................. No more than 1.0% (0 dB)
Input (Sensitivity)
LINE (INPUT) suisse 63 mV (Input impedance 85 k£)
Output (Reference level)
LINE (OUTPUT) u.a 316 mV
(Output impedance 4.7 kQ)
MISCELLANEOUS
Power Requirements
KU, KE modals re AC 120 V, 60 Hz
HEM model .............. AC 220 V, 50/60 Hz
HB, HP models AC 240 V, 50/60 Hz
D, D/G models AC 120/220/240V, 50/60 Hz (switchable)
Power Consumption
PR RCI ceca 22 watts
HEM, HB, HP MOSS... 19 watts
D DEE. soso sense 16 watts
Dimensions. 320 (W) x 99.5 (H) x 217 (D) mm
12-10/16 (W) x 3-15/16 (H) x 8-9/ 16 (D) in
Weight (without packaging) .................. 3.7 kg (8 Ib 30 oz)
14
FURNISHED PARTS
Operating instructions .......................................,.....
Connection cord assembly
SUBFUNCTIONS
One-touch recording
Built-in Dolby noise reduction system (type B and C)
IC-based full logic control
Auto tape selector function
Cassette half indicator
Reverse playback/reverse recording
MS/SKIP function
Player synchro recording
Auto rec mute
Auto functions
Automatic level control
3-digit tape counter
Auto repeat
Air damp eject function
Timer standby function
Remote control operation
Electronic full-auto-stop mechanism
NOTES:
1. Reference Tapes:
Normal and LH: DIN 45513/BLATT6 or equiv.
CrO, DIN 45513/BLATT7 (CrO,) or equiv.
2. Reference Recording Level: Meter 0 dB indicating level
(160 nwb/m magnetic level = Philips cassette reference
level)
3. Reference Signal: 315 Hz
4. Wow and Flutter: e JIS (3 kHz, with acoustic compensa-
tion (weighted) rms value); DIN 3,150Hz with acoustic
compensation (weighted) PEAK value DIN 45507
5. Frequency Response: + Measured at — 20 dB level,
DOLBY NR OFF, level deviation is + 6 dB without indica-
tion.
6. Signal-to-Noise Ratio: e Measured at 3rd harmonic distor-
tion 3% level, weighted (DIN 45513/BLATT7)
7. Sensitivity: Input level (mV) required for reference record-
ing level with input (REC) level control set to maximum
8. Maximum Allowable Input: While decreasing settings of
input (REC) level controls and increasing level at input
jacks, this is the maximum input level (mV) at the point
where recording amplifier OUTPUT waveform becomes
clipped.
9. Reference Output Level: Playback output level when
meter indicates 0 dB.
10. This model does not employ a recording/playback con-
nector (DIN-type).
NOTE:
Specifications and the design are subject to possible
modifications without notice due to improvements.