Bartscher PI100-98ET Bedienungsanleitung Seite 40

3.2.3. SWITCHING ON, START COOKING AND SWITCHING OFF
−
Fill the vat with hot or cold water, according to need, using the tap that the appliance is equipped with.
−
The appliance has a three-position selector to start cooking functions (see figure "Controls").
−
Here is a list of the procedures for a safe and correct use of the appliance.
Energising the unit:
−
Connect the appliance by turning on the main switch installed before it.
Start of cooking:
−
Turn the selector from position "0" to one of the heating positions according to cooking requirements.
−
The green light turns on automatically.
−
Generally cooking is started with the selector in position "2"; once the vat has reached cooking
temperature, turn the selector to "1" to maintain it.
−
Set the operating thermostat knob on the desired temperature between 40 and 100°C.
−
Heating will start and the orange light will turn on automatically.
−
The orange light will turn off as soon as the set temperature has been reached.
−
To make water boil quickly, turn the knob over the temperature of 100°C.
−
Heating elements operate continuously.
−
By turning the selector from position "2" to "1", it is possible to keep the water boiling and use less
power.
−
Do not use aggressive substances or abrasive detergents when cleaning the stainless steel components.
−
Avoid using metal pads of the steel parts as they may cause rust. For the same reason, avoid contact
with materials containing iron.
−
Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder pumice stone.
−
In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g. Scotch-Brite).
−
It is advisable to clean the appliance only once it has cooled down.
Warning! : When cleaning the appliance never use direct jets of water to prevent infiltration of
the liquid and damage to components.
−
Clean the cooking vat with water and a detergent, rinse thoroughly and dry well with a soft cloth.
−
External surfaces should be washed down using a sponge, and hot water with a suitable proprietary
cleaner addend.
−
Rinse always thoroughly and dry with a soft cloth.
Notes regarding the pressure kettles:
−
Do not use detergents containing high percentages of ammonia and sodium to clean the lid gasket, as it
could be damaged and its tightness quickly affected.
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Pentole elettriche Serie 900
3.3. CLEANING AND CARE OF THE APPLIANCE
3.3.1. DAILY CLEANING
pagina
06.10.02
- IT
40