Bartscher PI100-98ET Bedienungsanleitung Seite 35

−
Main structure in AISI 430 with 4 adjustable height feet.
−
Panels in stainless steel AISI 304, thickness 10-12/10.
−
Cooking vat in stainless steel AISI 316, thickness 20/10.
−
Chrome-plated brass drainage tap.
−
Lid in stainless steel, hinged and spring balanced in all opening positions.
−
Jacket and lining in stainless steel AISI 304, thickness 15-20/10.
−
Heating system comprising shielded heating elements made from "Incoloy-800" alloy with boiler and
steam circulation.
−
Jacket pressure is controlled by a safety valve set at 0.5 bar; the appliance is equipped with an analogue
pressure gauge.
−
The cold water connection is 10 mm.
−
The hot water connection is 10 mm.
−
Safety thermostat to interrupt operation automatically in case of failures.
−
The appliance is equipped with a three-position selector with three heating functions:
−
position "0" Heating not activated
−
position "1" Reduced power 50%
−
position "2" Full power 100%
−
Operating thermostat for temperature adjustment inside the cooking vat.
−
Jacket's water automatic filling (optional).
−
Stainless steel lid with heat-resistant silicone gasket.
−
Hermetic closing of lid ensured by 4 screw clamps.
−
The relief valve for the pressure that develops inside the cooking vat is set at 0,05 bar.
−
On request, the appliance can be equipped with a pressure gauge indicating the pressure inside the
cooking vat.
1.4. LAWS, TECHNICAL PRESCRIPTIONS AND DIRECTIVES
−
When installing the appliance it is necessary to follow and comply with the following regulations:
−
current regulations on the matter;
−
any hygienic-sanitary regulations concerning cooking environments;
−
municipal and/or territorial building regulations and fire prevention prescriptions;
−
current accident prevention guidelines;
−
electricity board regulations concerning safety;
−
the regulations of the electrical power supply company or agency;
−
any other local prescriptions.
Manuale d'istruzione per l'installazione, la manutenzione e l'uso
Pentole elettriche Serie 900
1.3. CONSTRUCTION
1.3.1. DETAILS ONLY FOR PRESSURE KETTLES
pagina
06.10.02
- IT
35