Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt, in
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.
General Description
See the front fold-out page for
illustrations.
Scope of delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Cordless hedge trimmer
-
Blade guard
-
Battery
-
Battery charger
-
"Charger and rechargeable battery"
operating instructions
-
Instruction Manual
Function Description
The cordless hedge trimmer features a
high-quality knife made from special laser-
cut steel. When trimming, the cutting teeth
move to and fro in a linear shearing mo-
tion. The strike guard at the tip of the knife
prevents unpleasant kickback reactions
when hitting walls, fences, etc. Operators
are protected by the appliance's two-hand
safety switch and quick-stop brake func-
tion. The hand protection guards your
hands against twigs and branches. Read
the sections below to learn more about
each operating element's function.
Overview
1 Strike guard
2 Safety knife bar
3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/Off switch
8 Rear handle
9 Battery
10 Charger
11 Blade guard
12 Suspension
13 Battery release buttons
14 Guide track
15 Release button on rear handle
Technical Data
Cordless
Hedge Trimmer ........ PHSA 20-Li A1
Motor voltage ............................ 20 V
Idling speed n
.............. 1300 min
0
Runtime ............................. max. 45 min*
Cutting length ....................appr. 520 mm
Length of knife ...................appr. 580 mm
Max. cutting capacity ...........appr. 15 mm
Weight (with battery, without
blade guard, without charger) ........2.7 kg
Sound pressure level
) .................... 75.1 dB(A), K
(L
pA
Sound power level (L
guaranteed ........................... 90 dB(A)
measured ........ 87 dB(A); K
Vibration (a
) .........................................
h
Rear handle.......1.28 m/s
Front handle ......1.72 m/s
* The actual runtime under load of a fully charged bat-
tery depends on how you work and on the load put on
the trimmer during operation.
GB
IE
NI
-1
(rpm)
=3 dB
pA
)
WA
= 2.53 dB
WA
, K=1.5 m/s
2
, K=1.5 m/s
2
2
2
5