Werbung
DISASSEMBLY
AND REASSEMBLY
PROCEDURE
MODEL
RAS-32CNH1
1. Front grille and Front Cover
(1) Press sections indicated "PUSH" on both sides of the front grille, to
open the front grille.
(2) Hold the front grille at the left and
right as shown
in the figure
and open the front grille until as far as possible.
(3) When the front grille is fully open, remove it forward.
(4) Remove the honeycomb
net and filter.
(5) Remove one screw and the lid on the right side.
(6) Disconnect the connector for driving the Moving panel.
(7) Open
the screw
covers
at the bottom
of the front cover
and
remove the screws.
Pull out the axis at the center to the front.
(8) Press section indicated "PUSH" at the bottom of the front cover to
remove
the cover from the support plate.
Using the drain pan as
a fulcrum, pull the bottom of the front cover forward.
Grasp both
ends
of the front cover
and pull out the front cover to the front.
(Pull out the right end first for easy removal.)
Front cover
Front grille
4
5
om
6)
——
a
2
Werbung
