Set to the "Hi" fan mode.
The operation lamp lights once and goes out in
5-10 seconds.
Lh Yes
il
Disconnect CN10 and set to the fan mode again.
Vv
The operation lamp lights once and goes out in
5-10 seconds.
Check to see if shorting, etc.
has occurred in the P.W.B.
pattem.
Check to see if the indoor fan is
Can the indoor fan be lightly turned by hand?
(Set the power switch to "off" to check.)
touching the chassis, etc.
If it does, repair.
Replace the indoor fan motor.
— 180 —