Werbung
New Cool Rhythm
i n inum
Minimum Smin. — Smin,
Sromberatore
ature
al
Ne
ei
ee ee
ae
ee
iA
ae
iS ae Sie
Notes:
(1) New cool rhythm is engaged when the fan speed is "auto" and the room temperature is less than set one plus 0.66°C
in the "auto" operation mode or cooling mode.
(2) The minimum new cool rhythm time is 10 minutes when the temperature falls and rises.
(3) Cool rhythm is not engaged during Nice temperature, Sleep operation.
(4) Pl control is engaged during new cool rhythm: the speed limit is the same as during normal operation.
(5) The new cool rhythm set temperature is also shifted during thermo OFF.
HITA-02976 / Druck:13
Final set temperature
Example 2: 25°C or more after 6 shifts
ie
icity
Example 1: Limited to 28°C
.
7
temnerature (+) sleep shift)
Example 3: 25°C is not reached after 6 shifts.
28°C
(shit upper limit)
SFCMIN.
(shift lower limit)
FH
|
a g
i
if
Indoor fan
S e o basis operation:
Ts
Outdoor fan
Horizontal air
shu
deflector
Horizontal
feng tens [Le
eee
ee
ae ere
ny
Maximum speed = CBEMAX
P1
Compressor
speed
Notes:
(1) The sleep operation starts when the sleep key is pressed.
(2) When the sleep key is set, the maximum compressor speed is limited to CBEMAX, and the indoor fan is set to "sleep
Lo" (AFWSOY).
(3) 30 minutes after the sleep key is set, the sleep shift of set temperature starts, and upper shift is made at least 6 times. If
25°C is not reached after 6 shifts, shifts repeat until 25°C is reached.
(4) The sleep shift upper value of set temperature is 28°C.
(5) After 6 hours, a shift down to the initial set temperature is made at a rate of 0.33°C/5min.
(6) If the operation mode is changed during sleep operation, the set temperature is cleared, and shift Starts from the point
when switching is made.
(7) The indoor fan speed does not change even when the fan speed mode is changed.
(8) When operation is stopped during sleep operation, the set temperature when stopped, as well as the time, continue to
be counted.
(9) If the set time is changed during sleep operation, all data including set temperature, time, etc. is cleared and restarted.
(10) If sleep operation is canceled by the cancel key or sleep key, all data is cleared.
Cooling Sleep Operation
-—67-
Werbung
