Inhaltsverzeichnis
Werbung
Note:
[DATA] button.
1) The command value will be the DATA 1 of Bn if it is within the range
If you press the assigned key(s) to select the desired data value,
2) If the number you set is 128, it can be the command Cn, then the
of 0-127 you set, then the value of DATA 2 can be set by pressing
please press and hold the [shift] button, then tapping 3 consecutive
data value can be set by pressing the [DATA] button.
[DATA] button.
digits. For example, tapping 0,6,4 in sequence to set the data value
3) If the number you set is 129, it can be the command Dn, then the
2) If the number you set is 128, it can be the command Cn, then the
64.
data value can be set by pressing the [DATA] button.
data value can be set by pressing the [DATA] button.
4) If the number you set is 130, it can be the command En, the value
3) If the number you set is 129, it can be the command Dn, then the
of DATA 2 can be set by pressing the [DATA] button and the DATA 1
6.
6. Drücken Sie CHANNEL; im Display erscheint die
Channel Settings
data value can be set by pressing the [DATA] button.
will be automatically generated by DATA 2:
In MIDI controller edit mode, press the [CHANNEL] button. The
Nummer des aktuellen Kanals und die Kontrolllampe
4) If the number you set is 130, it can be the command En, the value
If Data2 = 0~126, then Data1=0;
nixie tube displays current controller channel, and the "SONG" icon
of DATA 2 can be set by pressing the [DATA] button and the DATA 1
„Song" leuchtet auf. Geben Sie Ihren gewünschten
If Data2 = 127, then Data1=127;
will light up. By this time, directly set the channel value by pressing
will be automatically generated by DATA 2:
Wert zweistellig ein: 01-16.
In addition:
the assigned key(s) in the MIDI section to the desired function.
If Data2 = 0~126, then Data1=0;
If Data1=Data2=0, that means the pitch bend is in the lowest level;
Available range: 01-16.
If Data2 = 127, then Data1=127;
If Data1=0，Data2=64, that means the pitch bend is in the middle
In addition:
level;
Auf diese Weise können Sie die Einstellungen für alle drei
Note:
If Data1=Data2=0, that means the pitch bend is in the lowest level;
If Data1=127，Data2=127, which means the pitch bend is in the
If Data1=0，Data2=64, that means the pitch bend is in the middle
Controller vornehmen. Um den Modus zu beenden, drücken Sie MIDI EDIT; die Kontrolllampe
If you press the assigned key(s) to select the desired channel value,
highest level.
level;
please press and hold the [shift] button, then tapping 2 consecutive
erlischt.
If Data1=127，Data2=127, which means the pitch bend is in the
digits. For example, tapping 0,1 in sequence to set the channel value
highest level.
01.
Controller Output
1.
Press and hold the [SHIFT] button, then press the [MIDI MODE]
Controller Output
button to enter the MIDI controller mode, the LED indicator of
Controller Ausgang
[MIDI MODE] lights up.
1.
Press and hold the [SHIFT] button, then press the [MIDI MODE]
button to enter the MIDI controller mode, the LED indicator of
1. Drücken Sie SHIFT und MIDI MODE; die entsprechende
2.
[MIDI MODE] lights up.
Press the [CTRL 1] button, the LED indicator of [CTRL 1] will keep
Kontrolllampe leuchtet auf.
flashing briefly, it represents the system is transmitting MIDI
2. Drücken Sie CTRL 1, die Kontrolllampe leuchtet kurz auf um
information of controller 1. Then the relevant MIDI indicator lights
2.
Press the [CTRL 1] button, the LED indicator of [CTRL 1] will keep
up when the transmit process is complete. If you press the
anzuzeigen, dass das System MIDI-Daten sendet. Die
flashing briefly, it represents the system is transmitting MIDI
[CTRL 1] button again, the MIDI information will be repeatedly
information of controller 1. Then the relevant MIDI indicator lights
entsprechende MIDI-Kontrolllampe leuchtet, sobald die
transmitted.
up when the transmit process is complete. If you press the
Übertragung abgeschlossen ist. Wenn Sie CTRL 1 erneut drücken,
[CTRL 1] button again, the MIDI information will be repeatedly
werden die Daten abermals gesendet.
3.
transmitted.
In the same way, press the [CTRL 2] and [CTRL 3] button, the MIDI
3. Genauso können Sie CTRL2 oder 3 drücken, um die Daten von
information of corresponding controller will be transmitted from the
MIDI Out zu übertragen.
MIDI OUT.
3.
In the same way, press the [CTRL 2] and [CTRL 3] button, the MIDI
4. Wenn Sie den Modus verlassen möchten, drücken Sie die Tasten
information of corresponding controller will be transmitted from the
SHIFT und MIDI MODE.
MIDI OUT.
4.
In the MIDI controller mode, if you want to exit, press and hold the
[SHIFT] button, then press the [MIDI MODE] button.
4.
In the MIDI controller mode, if you want to exit, press and hold the
[SHIFT] button, then press the [MIDI MODE] button.
Restore Factory Setting
Restore Factory Setting
Wiederherstellen der Werkseinstellungen
In shutdown mode, press and hold [+/YES] and [-/NO] buttons together,
then turn the piano on, the system will be restored to factory setting, and
delete all recorded data, meanwhile the nixie tube displays "---". After the
Wenn Sie beim Einschalten des Gerätes die Tasten +/YES und -/NO
In shutdown mode, press and hold [+/YES] and [-/NO] buttons together,
delete process is complete, the piano will be restored to the state of
then turn the piano on, the system will be restored to factory setting, and
gedrückt halten, werden alle Einstellungen gelöscht und das Gerät auf
power-on automatically. Please be careful.
delete all recorded data, meanwhile the nixie tube displays "---". After the
die Werkseinstellungen zurück gesetzt. Im Display erscheint „———".
delete process is complete, the piano will be restored to the state of
Sobald das Löschen und die Wiederherstellung der Werkseinstellung
power-on automatically. Please be careful.
abgeschlossen ist, startet das Gerät wie gewohnt.
24
24
23
23
Werbung
Inhaltsverzeichnis
