Becker ronic TimeControl Montageanleitung Und Bedienungsanleitung Seite 68

FUNCTION (only when the control panel is detached, for
qualified technicians only)
EXTERNAL ON/OFF/SWITCH, ALARM SIGNAL ON/OFF
(Processing of external signals, processing of alarm signals)
EXTERNAL SWITCH
1. You have confirmed the RUNNING TIME function. EXTERNAL ON appears.
(EXTERNAL ON/ OFF/SWITCH denotes the external control signals. Factory
default is EXTERNAL SWITCH)
2. You can select the required settings for the control inputs using the +/- but-
tons.
3. Confirm your selection with OK.
The following interactive window is only displayed if you have
selected DRIVE CONTROLLER.
4. ALARM SIGNAL ON appears. (ALARM SIGNAL ON is the factory default)
5. You can switch the ALARM SIGNAL ON or OFF using the +/- buttons. Con-
firm with OK.
6. The ALARM SIGNAL ON/OFF function is now set.
7. For details on further programming in the FUNCTION menu, please con-
tinue reading.
68 - en
ALARM SIGNAL