Commissioning; Factory Setting - Becker Ronic Timecontrol Montageanleitung Und Bedienungsanleitung

You "wake up" the control unit the first time you press the button. Now you can
choose the language with the +/- buttons and apply your selection by pressing
OK. The control unit is in Auto mode.
By pressing the RESET button (with a ballpoint pen or sim-
ilar), the control unit is reset to its factory settings.
Exception: Function, Language selection and City selection
menus.
TIME/DATE:
PROGRAM:
ASTRO -> BLOCK ->
SETTING:
FUNCTION:
54 - en

Commissioning

Factory setting

Current CET and current date
BLOCKING TIME Monday–Friday (1–5)
06:30,
No preset blocking times
BLOCKING TIME Saturday, Sunday (6,7)
08:00,
No preset blocking times
HOLIDAY OFF
Light sensor SUN 05 sun value (if light sensor is
connected)
END POSITION, location
SUMMER/WINTER ON
ROLLER SHUTTER, DRIVE CONTROLLER, EX-
TERNAL SWITCH, ALARM SIGNAL ON, EXPERT
MODE OFF