Becker ronic TimeControl Montageanleitung Und Bedienungsanleitung Seite 63

SETTING
INTERMEDIATE POSITION, VENTILATION/TILT, Prog1 END POS (time/
position programming)
INTERMEDIATE POSITION
1. You have confirmed the HOLIDAY/LIGHT SENSOR menu items. INTERMEDI-
ATE POSITION appears.
2. You can set the INTERMEDIATE POSITION running time using the +/- but-
ton. The running time is given in seconds or you move to the INTERMEDIATE
POSITION from the upper end position using the UP/DOWN button.
3. Confirm with OK.
4. You can set the VENTILATION/TILT running time using the +/- button. The
running time is given in seconds or you move to VENTILATION/TILT from the
lower end position using the UP/DOWN button. Confirm with OK.
5. You have confirmed the VENTILATION/TILT menu item. PROG1 END POS/
PROG1 INTERM POS or PROG1 VENT/TILT appears.
6. You can choose between PROG1 END POS, PROG1 INTERM POS and
PROG1 VENT/TILT using the +/- button.
Your selection determines which position the shading solu-
tion moves to from the upper end position at the set switch-
ing time.
7. Confirm your selection with OK.
8. The PROG1 END POS function is now set.
9. For details on further programming in the SETTING menu, please continue
reading.
VENTILATION
PROG 1 END POS
63 - en