Becker ronic TimeControl Montageanleitung Und Bedienungsanleitung Seite 61

PROGRAM
PROG2/OFFSET (e.g. evening closing time to ventilation position)
AUTO
OFFSET
1. Press the MENU button.
2. To select the PROGRAM menu, press the + button until PROGRAM appears.
3. Confirm with OK.
4. Press the + button until PROG2 appears.
5. Confirm with OK.
6. Press the + button until the OFFSET menu appears.
7. Confirm with OK.
8. You can set the closing time separately using the +/- buttons (max. +/- 240
min., depending on PROG1 SWITCHING TIME
OK.
9. Press the MENU button to switch to Operating mode.
In the SETTING menu item, you must set the ventilation posi-
tion running time and select PROG 2 VENTILATION in the end
position.
PROGRAM
PROGRAM
PROG 2
AUTO
). Confirm your setting with
OFFSET
61 - en