Becker ronic TimeControl Montageanleitung Und Bedienungsanleitung Seite 53

Function menu
FUNCTION
This mode is only intended for trained, specialist personnel!
(Appears only when the control panel is detached)
In the FUNCTION menu you can set the following functions:
• ROLLER SHUTTER/VENETIAN BLIND (Selection of the shading solution)
• DRIVE CONTROLLER/GROUP CONTROLLER
• RUNNING TIME
• EXTERNAL (SWITCH/OFF/ON) switching of external group inputs
• ALARM SIGNAL
• EXPERT MODE
• INITIAL OPERATION (for service purposes)
• RELAY (for service purposes)
• TOTAL RUNNING TIME (for service purposes)
DRIVE CONTROLLER
The drive is connected directly to the control unit.
GROUP CONTROLLER
The control unit controls a group.
EXTERNAL OFF / EXTERNAL ON / EXTERNAL SWITCH
• EXTERNAL OFF -> Group inputs are always switched off.
• EXTERNAL ON -> Group inputs are always switched on.
• EXTERNAL SWITCH -> Group inputs are switched on in Auto mode and
switched off in Manual mode.
EXPERT MODE
If city selection (EXPERT MODE OFF) is too imprecise for you, you can set the
exact location using degrees of latitude and longitude (EXPERT MODE ON).
53 - en