Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RotoForce-3
Instruction Manual
RotoForce-3
Safety Precaution Sheet
To be read carefully
before use
1.
The operator should be fully aware of the use of the machine according
to the Instruction Manual. The machine must be placed in an adequate
working position.
2.
Be sure that the actual voltage corresponds to the voltage stated on the
back of the machine. The machine must be earthed.
3.
The specimen holder disc must be clamped in the quick coupling prior
to starting the machine. RotoForce-3 must be correctly and securely
mounted on the grinding/polishing machine.
4.
Do not touch the rotating parts during operation.
5.
If you observe malfunctions or hear unusual noises - stop the machine
and call technical service.
6.
Blue lubricant: follow the current safety rules for handling, mixing, filling,
emptying and disposal of the alcohol-based lubricant.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for damage(s)
to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).
Werbung
