ABB PowerValue 11 LI Pro Serie Bedienungsanleitung Seite 68

68
—
3.2.1-1: PowerValue 11
LI 600-800VA battery
replacement procedure
- Remove front panel
—
3.2.1-2: PowerValue 11
LI 600-800VA battery
replacement proce-
dure - Remove battery
A
en
A B B U P S P R O D U C T S A N D S O L U T I O N S
3 .2 .1 For 600 and 800 VA models
1. Power off the UPS and disconnect all input/
output AC/DC power cords and
connections.
2. To remove the front panel (A), insert a flat
screwdriver (B) in the gap between front
panel and body case,
GENTLY PRY THE FRONT PANEL
APART FROM THE BODY, WHILE
CAREFULLY REMOVING THE FRONT
COVER, PAY ATTENTION TO
NOTE
FRAGILE CABLES
3. Remove the battery protection (C).
A
3
—
3.2.1-1
D
—
3.2.1-2
4.
5.
6.
7.
8.
9.
10. Reinstall the front panel (A).
11. Reconnect all cables and switch on the UPS.
A
2
E
E
-
+
C
Pull out the battery (D).
Disconnect the battery wires (E).
Dispose of the battery properly (D).
Take a new battery (D).
Make sure the red wire is secured to the red
battery pad and the black wire to the black
battery pad, and reconnect the battery
wires (E).
Insert the new battery (D) into the unit, and
reconnect the battery protection (C).
A
1
B
A
3