Werbung
Verfügbare Sprachen
Verfügbare Sprachen
60
—
1 Installation
—
1 .1 Introduction
—
1 .2 Storage
en
A B B U P S P R O D U C T S A N D S O L U T I O N S
PowerValue 11 LI Pro, which is a line-interactive
uninterruptible power supply, has been designed
to protect sensitive electronic devices such as
computers and telecommunications equipment
from virtually all forms of power interference,
including complete power failures.
When there is a mains supply and the UPS is
switched on, the UPS charges the battery and
directly provides power to the equipment
connected to the AC line. In case of a mains failure
the reliable battery can provide the stable power
to complete your work, save the data and safely
shut down your system.
The UPS shipping box contains:
• UPS PowerValue 11 LI Pro
• IEC female-male C13 <-> C14 output power
cord
• Input cable with Schuko plug
• USB cable
• User manual
• Store the UPS in a dry location with the batteries fully charged. The storage temperature must be
between -15°C and +55°C. If the unit is stored for a period exceeding 3 months, optimal battery
lifetime is obtained if the storage temperature does not exceed 25°C.
• If the unit is stored for an extended period of time, the batteries must be recharged every 2 months.
Inspect the UPS for damage after unpacking. If
any damage is present please immediately notify
the carrier and place of purchase.
IN CASE OF RECOGNIZABLE DAMAGE:
DO NOT CONNECT ANY VOLTAGE TO THE
UNIT
DO NOT PUT THE UNIT INTO OPERATION .
WARNING
Condensation may occur if the UPS system is
moved directly from a cold to a warm
environment. The UPS system must be absolutely
dry before being installed. Please allow an
acclimatization time of at least two hours prior to
installation. Save the original packaging material.
No liability can be accepted for any transport
damage when the equipment is shipped in non-
original packaging.
Werbung
