Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with air
or with oxygen or nitrous oxide:
Not suitable for use in the presence of
a flammable anesthetic mixture with
air or with oxygen or nitrous oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
Notes
• Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF FAILURE TO PRINT CONTENT OF ANY TYPE OR
LOSS OF DATA DUE TO FAILURE OF THIS UNIT OR ITS
PRINTING MEDIA, ASSOCIATED SOFTWARE,
EXTERNAL STORAGE, OR OTHER EXTERNAL DEVICE.
• SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT
OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
• Rasterization for True Type font is based on Free Type
Project software.
• Zlib
©1995-2003 Jean-loup Gailly and Mark Adler
• SMPTE Test Pattern - RP133- Copyright 1983
SOP and Meta SOP Classes
SOP Class Name
Verification SOP Class
Basic Grayscale Print Management Meta
SOP Class
Basic Film Session SOP Class
Basic Film Box SOP Class
Basic Grayscale Image Box SOP
Class
Print SOP Class
Basic Annotation Box SOP Class
Presentation LUT SOP Class
10
Specifications
UPA-500 Cleaning Kit
The UPA-500 Cleaning Kit is designed for use with the
UP-DF500/DF550/DF750.
The UPA-500 Cleaning Kit includes the following three
cleaning supplies.
• Cleaning paper
• Lapping film
• Cleaning roller
For details on replacing the cleaning roller and cleaning
the thermal head, refer to the manuals on the CD-ROM
supplied with the printer.
About the Blue Thermal Film (UPT-517BL/
514BL/512BL/510BL/M712BL/M710BL)
For the customers in Europe
Hereby, Sony Corporation, declares that the Blue Thermal
Film (UPT-517BL/514BL/512BL/510BL/M712BL/
M710BL) is in compliance with the essential requirements
and other relevant provisions of the Directive 1999/5/EC.
For details, please access the following URL :
http://www.compliance.sony.de/
This product has been manufactured by or on behalf of
Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. Inquiries related to product compliance based
on European Union legislation shall be addressed to the
authorized representative, Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
Precautions
• Store unopened film in a cool dark place.
• Open film only when ready to use.
• Please refer to the imager's instruction manual about
• Prompty load the film into the tray and place into the
• This film is specifically designed for Sony imagers. Do
SOP Class UID
1.2.840.10008.1.1
1.2.840.10008.5.1.1.9
1.2.840.10008.5.1.1.1
1.2.840.10008.5.1.1.2
1.2.840.10008.5.1.1.4
1.2.840.10008.5.1.1.16
1.2.840.10008.5.1.1.15
1.2.840.10008.5.1.1.23
Used for cleaning the thermal head.
Used during periodic maintenance performed by a Sony
service representative. Keep this stored safely until the
periodic maintenance.
how to load the film.
imager.
not use with imagers from other manufactures.
Do not re-use
Doing so may result in malfunction and negatively
affect printing results.
Werbung
