Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*Important: The 10 presets can be used if the optional remote control GZDSP Remote is connected. Without the remote
control unit, it is only possible to use and edit the last preset that has been saved.
Click „Select Save Place" and choose one of the presets.
Confirm by clicking „Save to Flash"
*Note: All presets must be covered in numerical order (Pos
1>Pos 2>Pos 3>...) without skipping a position, otherwise it
will not be possible to access the following presets.
*Important: The 10 presets can be used if the optional remote control GZDSP Remote is connected. Without the remote
control unit, it is only possible to use and edit the last preset that has been saved.
Features of the „FILE" Dropdown Menu
PC Contrl
Open
Save
Save as
Factory setting
Class-D AMP Setting
Write to Device*
Read from Device*
Exit
Saving to the Preset Memory (write to device)
Opens the „Select COM" window (page 9)
Opens a setup file that has been saved previously to the PC memory
or an external drive
Saves the current setup as a file to the PC with unmodified filename. If
no filename has been selected yet, the dialogue will ask for the input.
Saves a setup file with a certain filename.
Sets the unit to default settings
No function
Saves the current setting to the preset memory of the DSP unit.
At the following window the preset number can be selected.
Opens the preset that has been selected with the optional remote
control GZDSP Remote
Closes the DSP software
- 18 -
Werbung
Inhaltsverzeichnis
