Ground Zero GZDSP 6-8X Anleitung Seite 31

Selecting the USB COM-port
After the DSP unit has been selected in the „Select Device" menu,
the „RS232 Setting" window will appear. Usually the correct COM port will be
selected automatically and varies depending on the computers environment.
By clicking the „Connect" button the GZDSP 6-8X will be connected to the PC
automatically.
Note:
The COM port will be assigned automatically by the Windows™ operating
system. Please note that this may be one of the COM1 to COM9 ports. If any
problem remains, the description on the following page has to be noticed
Now the „Click here to test" button should be chosen.
All 4 points should be checked.
By clicking the „[OK] Click here to start" button will open the "Channel Matrix"
- 9 -