Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
If that failure notice pops up, one of the two identical distances must be reduced by 1 cm.
In this case the instruction from point 5 on must be followed.
After editing the numbers correctly the background of the button turns to red ->
4.
Clicking the button
data to the Delay(ms) list.
5.
In case of 2 channels with largest distance, one of these two identical numbers must be reduced by 1cm.
Subsequently the
6.
Now the real value can be re-edited
Clicking the button
the data to the Delay(ms) list.
Example of use
1.
2.
The number of channels with the maximum distance must be 1.
In case of 2 channels with maximum distance (for example
mono subwoofer at G/H) a failure notice will pop up.
will cause the calculation of the respective time alignment and transfer the
button must be clicked. Finally the background turns to red ->
will cause the calculation of the respective time alignment and transferring
- 15 -
All measured distances (cm) must be added to the
graphic.
The speaker with the largest distance will be set as
the reference with the button
Warning
.
.
Werbung
Inhaltsverzeichnis
