Herunterladen Diese Seite drucken

Parkside PKA 20-Li B2 Originalbetriebsanleitung Seite 13

Vorschau ausblenden Andere Handbücher für PKA 20-Li B2:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
Switching on and off
Switching on the appliance (air pump)
Set the ON/OFF switch
position
.
Switching on the appliance (compressor)
Set the ON/OFF switch
position
.
The appliance starts as soon as you switch on
the display
(see section "Display").
Switching on the LED work light
Set the ON/OFF switch
The LED work light
NOTE
The compressor will not work if the display
is switched off.
Switching off the appliance
Set the ON/OFF switch
Switching off the LED work light
Set the ON/OFF switch
Display
Press the ON/OFF button
the display
.
After two seconds, the current pressure of the
connected item is shown.
NOTE
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
You can switch between "bar", "psi" and "kpa"
on the display
by pressing the ON/OFF
button
.
NOTE
The display
(and also the compressor)
switches off after around three minutes of
inactivity.
The compressor will not work if the display
is switched off.
PKA 20-Li B2
to the
to the
to position "I".
7a
lights up.
7b
to the position
to position "O".
7a
to switch on
NOTE
The compressor switches off automatically
when the preset pressure has been reached.
Press and hold the ON/OFF button
5 seconds to turn off the display
Setting the pressure
Press the "+" button
set the desired pressure.
TIP
When you press and hold the "+" button
or the "-" button
pressure setting changes quickly.
Use
Inflation
Remove the valve cap of the item you want
.
to inflate.
Remove the blower hose
compartment
Fit the connection of the blower hose
the air outlet
clockwise.
Fit the appropriate adapter
the blower hose
Push the adapter
the item.
Switch the appliance on by moving the
ON/OFF switch
Once the desired level of inflation has been
reached, switch off the appliance by moving
the ON/OFF switch
Now remove the adapter
Replace the valve cap on the item that you
have inflated.
.
or the "−" button
for a little longer, the
with blower hose
from the storage
.
. Screw it in tight by turning it
or
onto
.
or
into the valve of
to the position
to the position
or
.
GB │ IE
for
to
onto
.
.
 9

Werbung

loading