Herunterladen Diese Seite drucken

Miche SYNTIUM AERO Gebrauchs- Und Wartungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

ENGLISH
1
GENERAL INDICATIONS
We thank you for buying the SYNTIUM AERO wheels, product that
will guarantee you security and functionality through the years.
Before proceeding with using the wheels, please read carefully the
following instruction and store them in a safe place for eventually
reusing.
In the box of wheel set you will find:
• The front wheel arranged with TX-12 system
• The rear wheel arranged with TX-12 system
• The manual of instructions and use of Wheels
• Rim tapes
Caution! Only use the Miche supplied rim tapes with your Mi-
che wheels and only with the correct clincher tyre and inner
tube. The standard supplied rim tapes are not suitable for
Tubeless Ready tyres wheels
� Warning
Any modification or alteration (and graphic) of the product with
non-original spare parts or spare parts not delivered directly
by Fac Michelin S.r.l., involves the expiration of the guarantee.
� Warning
Direct and violent impacts on broken road surfaces can cause
damage to the rims. Such damage is outside the conditions of
our guarantee and repair costs will be charged directly to the
customer.
� Warning
In case of strange impact caused from bad road base or wheels
transport, we trust to bring the wheels to your mechanic for a
check.
� Warning
Tyre width section: min 25 / max 34
� Warning
Only Shimano original lock ring designed for through axle inter-
nal diameter 27mm to be used with the disc brake.
Warning before using the bicycle:
• Check for proper operation and state of wear of all the com-
ponents before starting to ride. Before any maintenance ope-
rations on your wheels, always wear gloves and protection
glasses.
• The rims have been made with great dimensional precision. If
fitting a tyre on a rim is too easy, it may be too big and this
will have significant implications for safety. We therefore re-
commend using only high quality tyres that require the use of
clincher tyre levers and a reasonable amount of strength to fit
them. Using a tyre that is too big for the rim may cause the tyre
to rupture unexpectedly and cause accidents, physical injuries
conversion.
or even death. WARNING! Incorrect rim / clincher tyre coupling
may cause it to deflate, burst or detach suddenly and cause
accidents, serious injuries or even death.
• Check the condition and pressure of the tires fitted to your whe-
els. Please consult the manufacture of your tires of choice when
inflating your tyres.
• C heck that the wheels are firmly anchored to the frame with the
locking item closed in the correct position. If there is the passing
through pin, consult the installation instructions provided by the
manufacturer of the bicycle or fork.
Warning, an incorrect locking may cause the detachment of
the wheel and derive in accidents and serious or fatal injuries.
• Check the tension of the spokes so as to notice any spokes
which got loose. In the case spokes are loose, contact a qualified
mechanic or special personnel to perform the tensioning.
Warning, the use of wheels not centered properly or with
spokes broken and/or loosen or damaged may cause an ac-
cident, serious injury or death.
• Check that the braking system and the brake pads in the brake
calipers are in good state and that the screws on the disc or the
locking ring of the disc, depending on your model, are properly
locked.
• To the users of more than 78 kg weight, Fac Michelin S.r.l. sug-
gests to check the wheels status to the mechanic every two
months or every 500km.
• If the total weight of your bike and various parts installed
exceeds 109 kg, not used these wheels.
• Never wash the pieces with pressure-fed water because water
may get through the seals and cause permanent damage to the
internal components. We recommend washing components with
a sponge, mild soap, and water.
• Salt water environments (as found on winter roads and neat
the seaside) can cause galvanic corrosion on most bike parts.
Carefully rinse, clean, dry and re-lubricate all exposed parts
to avoid damage, malfunctions and accidents.
• If your component shows signs of rust, this means it has to be
changed URGENTELY as it might be a sign of damage.
7

Werbung

loading