Herunterladen Diese Seite drucken

Parkside PBSG 95 E6 Originalbetriebsanleitung Seite 60

Vorschau ausblenden Andere Handbücher für PBSG 95 E6:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 69
GB
MT
in accordance with these
instructions, taking into
account the working con-
ditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grasp-
ing surfaces dry, clean
and free from oil and
grease. Slippery handles and
grasping surfaces do not allow
for safe handling and control of
the tool in unexpected situations.
5) Service
a) Have your power tool ser-
viced by a qualifi ed repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
Additional safety
instructions
If the mains cable of this device is
damaged, it must be replaced by
the manufacturer or their customer
service or by a similarly qualifi ed
person in order to avoid hazards.
60
Residual risks
There will always be residual risks
even if you operate this power tool
according to the instructions. The
following hazards may occur in
connection with the type and design
of this power tool:
a) Lung damage if suitable respirato-
ry protection is not worn.
b) Hearing damage if suitable ear
protection is not worn.
c) Damage to health as a result of
- touching the area of the grin-
ding tool which is not covered;
- ejection of parts of workpieces
or damaged grindstone.
d) Health injuries resulting from the
effect of vibration on the hands
and arms in the event that the de-
vice is used over a longer period
of time or is not used and main-
tained properly.
Warning! During operation,
this power tool produces an
electromagnetic fi eld. Under certain
circumstances, this fi eld may nega-
tively affect active or passive medi-
cal implants. In order to reduce the
danger of serious or fatal injuries,
we recommend that individuals who
wear medical implants should con-
sult their doctor and the manufactu-
rer of the implant before operating
the machine.

Werbung

loading