Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
MT
c) Do not expose power tools
to rain or wet conditions.
Water entering a power tool
will increase the risk of electric
shock.
d) Do not abuse the cord. Nev-
er use the cord for carry-
ing, pulling or unplugging
the power tool. Keep cord
away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operation of the power
tool in a damp environ-
ment is unavoidable,
please use a residual cur-
rent circuitry. The use of a
residual current circuitry reduces
the risk of an electric shock.
3) Personal safety
a) Stay alert, watch what
you are doing and use
common sense when op-
erating a power tool. Do
not use a power tool while
you are tired or under the
infl uence of drugs, alcohol
58
or medication. A moment
of inattention white operating
power tools may result in serious
personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position be-
fore connecting to power
source and/or battery
pack, picking up or carry-
ing the tool. Carrying power
tools with your fi nger on the
switch or energising power tools
that have the switch on invites
accidents.
d) Remove any adjusting key
or wrench before turning
the power tool on. A wrench
or a key left attached to a rotat-
ing part of the power tool may
result in personal injury.
e) Do not overreach. Keep
proper footing and bal-
ance at all times. This ena-
bles better control of the power
tool in unexpected situations.
f) Dress properly. Do not
wear loose clothing or
Werbung
