Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
m
CAUTION
ATTENTION
CHAPTER 2
INSTALLATION AND
COMMISSIONING
m
WARNING
nmlr
Central ventilation units AIR1 XVP
The AIR1 XVP.. unit application limits can be seen in the following
Ambient temperature
Outside/extract air temp
Humidity (max)
The AIR1 XVP.. units with standard equipment are designed for installation and application in frost-free interior rooms
(room temperature > 0 °C).
A frost-free condensation outlet must be ensured on site.
The corrosion resistance level of the housing is C4 according to ISO 12944. The unit can be used under these con-
ditions.
Any use other than the intended use is prohibited!
The AIR1-XVP unit is no replacement for an air conditioning system or heating system!
21
General installation instructions
m
Risk of personal injury and material damage!
Internal sheet metal parts have sharp edges and notches that can cause scratches/injuries during installation
and maintenance of the unit and/or accessories
– The installation and maintenance of the unit may only be carried out by qualified specialist personnel.
– Suitable protective equipment must be worn.
211 Receipt
The delivery contains one of the following unit types:
AIR1 XVP 850
AIR1 XVP 1250
AIR1 XVP 1800
The scope of delivery also includes:
The condensation discharge outlets, main switch and door key included in the scope of delivery are located inside on
the supply air side of the unit. There is a door key on top of the unit for opening the unit (Fig.1).
Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
212 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging influences:
Protection by dry, airtight and dust-proof packaging (plastic bag with desiccant and humidity indicators). The storage
place must be waterproof, vibration-free and free of temperature variations (ambient temperature limit: min. 0 °C /max.
+40 °C). Damages due to improper transportation, storage or commissioning must be verified and are not liable for
warranty.
AIR1 XVP
AIR1 XVP
AIR1 XVP
850
1250
1800
0 - 50 °C
0 - 50 °C
0 - 50 °C
-20
/
50 °C
-20
/
50 °C
-20
90 % RH
90 % RH
90 % RH
Ref. no. 40612
Ref. no. 40613
Ref. no. 40614
2x condensation discharge outlets incl. mounting material
2x door key (1x inside, 1x top)
1x main switch
3
table::
AIR1 XVP
AIR1 XVP
2500
3500
0 - 50 °C
0 - 50 °C
/
50 °C
-20
/
50 °C
-20
/
90 % RH
90 % RH
AIR1 XVP 2500
Ref. no. 40615
AIR1 XVP 3500
Ref. no. 40616
EN
50 °C
Fig1
Werbung
