Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
EN
Central ventilation units AIR1 XVP
The filter/maintenance alarm is triggered if the filter pressure loss is higher than the maximum permissible filter pressure
loss, regardless of the selected operating point. The alarm will automatically deactivate after the filter change.
Supply air filter type
ePM1 55 % (F7)
Press the
button to enter the "Supply air filter type" menu. Press the
OK
OK
confirm by pressing the
OK
OK
21110
Filter type Extract air
The following filter types are available:
• ePM10 50 % (M5)
• ePM1 55 % (F7)
A corresponding filter loss curve is stored for each type of filter. The filter/maintenance alarm is triggered if the filter
pressure loss is higher than the maximum permissible filter pressure loss, regardless of the selected operating point.
The alarm will automatically deactivate after the filter change.
Extract air filter type
ePM10 50% (M5)
Press the
button to enter the "Extract air filter type" menu. Press the
OK
OK
confirm by pressing the
OK
OK
21111
Auxiliary heater type
Selection of available auxiliary heater types. The following selection options are available:
• None
• Water (warm water heater register)
• Electric (electrical heater register)
• DX heating register (change-over register DX)
Press the
button to enter the "Auxiliary heater type" menu. Press the
OK
OK
Confirm by pressing the
OK
OK
Aux. heater type
None
21112
Cooling register
Selection of available cooling register types. The following selection options are available:
• None
• Water (cold water cooling register)
• DX cooling register (change-over register DX)
Press the
button to enter the "Cooling register type" menu. Press the
OK
OK
Confirm by pressing the
OK
OK
Cooling register type
None
21113
Night cooling (Bypass)
Select Yes/No to activate/deactivate the night cooling.
Settings:
• Outside air temperature Activation
• Outside air temperature Night Max.
• Outside air temperature Night Min.
• Room temperature min.
• Start/stop time Free night cooling
• Time to block heater output after free night cooling
• Outside air sensor fixed in intake duct
Bypass
(Night cooling)
Yes →
Active above outside temp.
22 °C
↑
OK
OK
↓
button.
↑
OK
OK
↓
button.
button.
↑
OK
OK
↓
button.
↑
OK
OK
↓
↑
OK
OK
↓
OK
OK
↓
34
OK
OK
button to select filter type supply air and
OK
OK
button to select filter type extract air and
button to select the auxiliary heater type.
OK
OK
button to select the cooling register type.
OK
OK
OK
OK
OK
OK
Werbung
