Vaccum Cleaner Use; Switching On The Vacuum Cleaner; Battery Charging - eta AQUILO PRO Bedienungsanleitung

5. Check correct installation of cleaning grate D2.

5. VACCUM CLEANER USE

The robot vacuum has the voice message function (various languages can be set).

5.1 SWITCHING ON THE VACUUM CLEANER

1. Press button C1 for approx. 3 seconds.
2. When the voice message will be issued and light buttons (C1 and C2) are lighting, the
device is ready for use.

5.2 BATTERY CHARGING

1. Check correct assembly of the base and its connection to electric mains (Light indicator
D1 must be lighting).
2. Place robot vacuum near to the base and press button C2. If the battery is deeply
discharged, place the robot vacuum directly on the base manually.
• Standard charging time is approx. 4-5 hours. Fully charged battery will work for
approx. 180 minutes, depending on set functions.
• The stated operating times are based on ETA's internal testing and only apply to
a new and fully charged battery. Depending on the age and wear of the battery, the
operating time decreases.
• After cleaning, the device will find the base automatically.
• The level of battery charging can be easily determined using "ETA AQUILO" app. You
can also sent the device back to the base using this app.
5.3 SWITCHING ON / STANDBY MODE / SLEEPING MODE / AUTOMATIC
SWITCHING OFF
Start (Cleaning)
Press C1 to switch on the robot vacuum.
Factory setting of the voice message is Czech.
Notes
EN - 53
Note
Note
EN