Problems Solutions; Technical Specification - eta AQUILO PRO Bedienungsanleitung

8. PROBLEMS SOLUTIONS

Problem
The device cannot be
switched on.
The device cannot be
charged.
Robot vacuum cannot
find the base.
Abnormal behaviour of
the machine.
Abnormal sounds are
generated.
Lower cleaning potential
or remaining dust on the
surface.

9. TECHNICAL SPECIFICATION

Robotic vacuum cleaner
Appliance protection class
operating voltage
Accumulator
Battery savings
Charging time
Weight
Dimensions
Frequency range
Output power (EIRP)
Wireless technology
Declared acoustic level is 72 dB(A) re 1pW.
Low battery. Place the robot vacuum on the base and
charge the battery.
Ambient temperature lower than 0 °C or higher than 35 °C.
Working temperature of the device is 0-35 °C.
Remove robot vacuum from the base and check its correct
connection to electric mains.
Check and clean charging contacts (on robot vacuum and
on the base).
Robot vacuum is located too far from the base, place it
nearer to the base. Do not relocate the base during cleaning.
Restart the device.
Wheels and the brushes are clogged. Clean where
necessary.
The dirt container is full. Clean it.
HEPA filter is dirty , clean it or replace.
The main brush is clogged. Clean it.
EN - 61
Solution
III.
14.4 V (DC)
Li-Ion
5200 mAh
4-5 hours
4.1 kg
Ø 380 mm x 99 mm
2.4 GHz
15.95 dBm
Wifi
EN