Vacuum Cleaner Maintenance; Cleaning The Dust Bin - eta Master Pro II Bedienungsanleitung

4) Switch on the vacuum cleaner by pressing the A6/E1 button, or in the application
to the desired cleaning mode.
5) After cleaning, empty the tank and let it dry properly - do not charge the robot with water
in the tank.
– Do not use/pour any detergent in the mop water tank.
– The pumping function will be activated by inserting the mop adapter C.
Don´t use the vacuum cleaner with adapter C without water in the container B8!
– Monitor the device during cleaning operation. Constantly monitor mopping operation.
– When mopping, we recommend cleaning the individual rooms.
– When mopping, check the vacuum cleaner and add water to the moping attachment,
if necessary, or rinse the mop.
– Do not use the mop attachment on carpets and prevent the vacuum cleaner from
hitting the carpet (alternatively, you can use prohibited zone function in the app
which can be set for floors with carpets).
– Remove and clean the mop attachment after use. Do not leave it installed on the
vacuum cleaner while charging or when not in use.
– After closing the tank with the plug, small water volume can leak through bottom holes.
After filling and closing, turn the adapter upside down and carry in this position.

6. VACUUM CLEANER MAINTENANCE

Carry out maintenance and cleaning regularly, depending on the frequency of use and
the amount of cleaning. In a more polluted environment (a pet household), more frequent
maintenance will be required. Failure to carry out maintenance may damage the
vacuum cleaner and its components!
Carefully wipe vacuum cleaner body incl. laser module with dry cloth. Remove dirt (if any)
in the laser module area (the dirt could deactivate the rotation mechanism and result in
deterioration of the surface mapping function and behaviour of the device.)
When turning the device, don´t put it on the laser module. Risk of damage!
6.1 CHARGING CONTACTS CLEANING
Switch off the vacuum cleaner and disconnect the charging station from the power
supply! Clean the charging contacts (A3, D2) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month. Do not use aggressive cleaning
agents or oils to clean the contacts.

6.2 CLEANING THE DUST BIN

1. According to Fig. 2, remove the dirt container B from the vacuum cleaner. Open its
lid and pour out the dirt and dispose of it together with normal municipal waste - if
necessary, use the dirt extraction function from the reservoir with the suction station.
If you empty the container manually, turn it with the outlet opening facing up.
2. Pour out excess water from container B8. Wipe the dust bin B with a damp cloth.
3. Open lid B5, remove the HEPA filter and gently blow or knock it out. Alternatively, use
the cleaning tool G for cleaning. Wash the filters B2 and B4 in clean water and let them
dry properly.
Remarks
CAUTION
EN - 49
EN