Preparation For Use - eta Master Pro II Bedienungsanleitung

EN
E – Remote control
E1 – ON /OFF/AUTO (automatic cleaning) / STOP (PAUSE) button
E2 – Directional buttons for manual control (FORWARD / RIGHT/
LEFT)
E3 – Button for setting the suction power level
E4 – Voice message on/off button
E5 – Light signalisation on/off button
E6 – Local cleaning button
E7 – Dampening intensity button
E8 – Button for return to charging station
E9 – Start dust collection
E10 – Pressed Button indicator lamp
E11 – OK pause/resume button
– Do not combine various types of batteries. Do not even combine used and new
batteries together.
– Batteries not intended for this purpose must not be charged.
– Rechargeable batteries must be removed from the appliance before charging.
– Remove the batteries if you will not be using the appliance for a long time.
– The supply terminals must not be short-circuited.
Charging
Battery type: 2x AAA
Inserting / replacing batteries
Remove the cover on the back of the controller and insert the batteries. Pay attention to the
correct polarity. Replace the cover in the opposite way.

4. PREPARATION FOR USE

Remove all packing material, remove vacuum cleaner and accessories.
Remove any adhesive, stickers, or paper from the vacuum cleaner.
4.1 PREPARATION OF THE VACUUM CLEANER
According to the intended use, install the dust bin B or additionally the mop attachment C
in the vacuum cleaner. Also choose the appropriate type of main brush (A10a/A10b/A10c).
Install the side brushes A9.
3 The following main brush types can be used:
HYBRID brush – a combination of lamellae and bristles, suitable for carpets and hard
floors, including moping
RUBBER BRUSH – rubber brush for all types of hard floors, suitable for hair collection and
FINE BRUSH – extra fine brush for hard and delicate floors, suitable for fine dust,
pet and human hair (fine brush must be used with fine brush cover A11b)
Remote control notes
mopping
EN - 44
E2
E10
E1 E8
E11
E9
E3
E5
E4
E
E7
E6