Vacuum Cleaner Maintenance - eta 512-Serie Bedienungsanleitung

7. VACUUM CLEANER MAINTENANCE

Carry out maintenance and cleaning regularly, depending on the frequency of use and
the amount of cleaning. In a more polluted environment (a pet household), more frequent
maintenance will be required. Failure to carry out maintenance may damage the
vacuum cleaner and its components!
7.1 CHARGING CONTACTS CLEANING
Switch off the vacuum cleaner and disconnect the charging station from the power
supply! Clean the charging contacts (A3, D3) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month. Do not use aggressive cleaning
agents or oils to clean the contacts.
7.2 DIRT TANK AND FILTERS CLEANING
1. Remove the dirt tank B from the vacuum cleaner. Dispose of dirt together with normal
household waste.
2. Clean the dirt tank with the tool I (or other suitable).
3. Remove the filters from the dirt tank and clean them with tool I (or other suitable). Blow
or knock the HEPA filter B3 gently. The foam filter B4 and protection filter B5 can be
rinsed under running water. If the dirt tank becomes dirty, you can also rinse it under
running water. Allow everything to dry thoroughly before reuse!
EN - 59
EN