Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Correspondence between the length and height of the suction pipe
Proceed as follows:
1.
Connect the suction pipe to the connector as indicated in figure 01 point 39, do not over tighten,
the connector has an OR that guarantees the seal.
WARNING
Use table 1 to calculate the maximum length of the suction pipe.
4.5 Delivery pipe connection
Proceed as follows:
1.
Connect the delivery pipe to the 1" connector as indicated in figure 01 point 11, page 39, insert
the supplied seal to ensure tightness.
2.
Fix the pipe to the wall with a suitable pipe clamp.
ENGLISH
Figure 03
Table 1
47
Werbung
