Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Proper use of the condensate drain
The condensate drain must only be used for the elminiation of standard
condensates from compressed air systems. Any other use is deemed improper.
Notes on compressor oils
Do not use compressor oils incompatible with polyamide. Such oils
can damage pressurised components of the condensate drain,
resulting in leaks and complete failure of the entire unit. Possible
results are: damages to the drain and/or unit failure. The
manufacturer's warranty will be void in case of damages caused by
incompatible compressor oils.
Technical Description
Overview
Top condensate inlet, vent
(revolving)
Bottom condensate inlet*
(not visible in diagram)
* not available in model ED3002 and ED3004
ED3002–ED3100_Int-1_08
Operating instructions /
Power connection
Lid with test button and signal LED
Optional connection: potential-free
contact*
Condensate outlet
EN
17
Werbung
