Silvercrest SSMS 600 D4 Kurzanleitung Seite 12

Operation
WARNING! RISK OF INJURY!
► Foodstuffs should not be too hot. Squirting contents may cause scalding.
NOTICE
When you beat cream with the whisk 0 hold the container at a slant during
►
the beating. In this way the cream will be thicker quicker. Ensure that cream
cannot be sprayed out of the container while it is being beaten. When
whipping cream, slide the speed regulator 1 to position "Max".
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch 2 to process foodstuffs at the standard speed.
Slide the speed regulator 1 in the direction of "Max" to increase the speed.
Slide the speed regulator 1 in the direction of "Min" to reduce the speed.
NOTICE
NEVER fill the bowl 8 BEYOND the MAX marking. Otherwise, the
►
appliance does not function optimally.
3) Press and hold the turbo-switch 3 to process foodstuffs at a higher speed.
By pressing the turbo-switch 3 the maximum processing speed is available
immediately.
4) Once you are done processing the food, simply release the pressed switch
2/3.
NOTICE
SSMS 600 D4
If you hear unusual noises during operation, e.g.
squeaking or similar, apply a small amount of neutral
cooking oil to the drive shaft of the hand blender 5.
GB │ IE │
9 ■