To assemble the hand blender
WARNING! RISK OF INJURY!
►
The blade is extremely sharp! Handle it with great care at all times.
Place the hand blender 5 on the motor unit 4 so that the arrow
■
to the symbol
unit 4 points to the symbol
Assembling the wire whisk
Press the whisk 0 into the whisk holder 9, until it firmly engages.
■
Place the so assembled whisk 0 onto the motor block 4 so that the arrow
■
at the symbol
Assembling the liquidiser
WARNING! RISK OF INJURY!
►
The blade is extremely sharp! Handle it with great care.
Carefully place the blade 7 onto its retainer in the bowl 8.
■
Turn the blade 7 a little until it slides onto the holder.
NOTICE
The blade 7 is not fixed firmly in the holder. This is normal. The blade 7 is
►
only sits firmly when the bowl lid 6 is put on.
Fill the bowl with the foodstuffs you wish to liquidise 8.
■
NOTICE
NEVER fill the bowl 8 BEYOND the MAX marking. Otherwise, the
►
appliance does not function optimally.
Place the bowl lid 6 onto the bowl 8 and turn it until tight. Thereby, the
■
lugs on the edge of the bowl 8 must be guided into the rail on the bowl
lid 6. Please ensure that the blade 7 is correctly engaged in the bowl lid 6.
Place the motor unit 4 on the bowl lid 6 so that the arrow
■
symbol
NOTICE
If you want to store food in the bowl 8, you can remove the base
►
bowl 8 and use it as a lid. To do this, carefully remove the bowl lid 6 and
motor unit 4 as well as the blade 7, if necessary. Remove the base
the bowl 8 and place it on top of the bowl 8.
│
GB │ IE
■
8
. Turn the hand blender 5 until the arrow
points to the symbol
.
. Turn the motor unit 4 until the arrow
.
. Turn the motor block 4 until the arrow
points
on the motor
points
points to the
points to the symbol
from the
8a
from
8a
SSMS 600 D4
.